Paint Protection Filmarmour you cannot see.
An 8-mil self-healing urethane skin, plotter-cut to your model and wrapped past every edge so nothing lifts.
Film is the only protection that stops physical damage. We install optically clear thermoplastic urethane over your factory paint — stone chips, highway rash, trolley scuffs and fuel spatter meet the film instead of the clear-coat. Heat activates the top layer, so light scratches close on their own in warm sun or under a steamer. Installed properly, it reads as paint: no orange peel, no silvered edges, no tucked seams peeling at the wash bay.
Best for
Highway-driven cars, dark and soft paints, new deliveries, and anyone protecting resale value on a performance or luxury car.
What's included
- Custom-plotter templates cut per model
- Front-end, track, or full-body coverage
- Edges wrapped into panel gaps — no lifting
- Headlamp and pillar options
- Hydrophobic gloss or matte top-coat finish
- Optional ceramic layer over the film
- Thickness
- 8 mil TPU
- Self-healing
- Heat activated
- Finish
- Gloss or matte
- Removal
- Residue-free, paint-safe
How it is donestage by stage.
- 01
Coverage planning
We walk the car with you and mark exactly which panels, edges and lamps the film will cover.
- 02
Deep clean & decontaminate
Wash, iron removal, clay and solvent wipe — film bonds only to genuinely clean paint.
- 03
Gloss preparation
Light correction of swirls and defects, because whatever is under the film stays there for a decade.
- 04
Plotter cutting
Templates are cut to your exact model, with oversize allowances for wrapped edges where panels permit.
- 05
Wet installation
Slip solution, squeegee tacking and heat forming in a dust-controlled bay by a dedicated installer.
- 06
Cure & inspect
48-hour cure, edge check under dual lighting, then handover with wash guidance and warranty documentation.
Answeredplainly.
Full body or front end?
Front end covers the panels that take 90% of highway damage. Full body is for owners keeping the car long term or living with soft, dark paint.
Will the edges peel?
Not when wrapped. We tuck film into gaps wherever the panel allows, which is why installation takes days rather than hours.
Can I coat over film?
Yes, and we recommend it. A ceramic layer over PPF adds hydrophobics and keeps the film easy to clean.
What about removal later?
Quality TPU removes cleanly with controlled heat and leaves factory paint untouched.
Book paint protection film
Send us your car and we'll advise the right package after an in-studio paint inspection.